Mon, 31 Jan 2022 13:17:36 +0100 60 https://hearthis.at/thebadgerman/ en-EN
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> philspen2000@yahoo.co.uk philspen2000@yahoo.co.uk https://hearthis.at/thebadgerman/ https://img.hearthis.at/3/4/7/_/uploads/9401078/image_user/w1400_h1400_q70_ptrue_v2_----cropped_1577184614743.jpg no no https://hearthis.at/thebadgerman/for-valour/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 6533425 no no Mon, 31 Jan 2022 13:17:36 +0100 2022-01-31T13:17:36+01:00 02:52 https://hearthis.at/thebadgerman/on-most-days/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 6510296 no no Wed, 19 Jan 2022 15:07:28 +0100 2022-01-19T15:07:28+01:00 02:06 https://hearthis.at/thebadgerman/on-your-marks/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 6090570 no no Sat, 17 Jul 2021 12:22:46 +0200 2021-07-17T12:22:46+02:00 02:39 https://hearthis.at/thebadgerman/one-and-all/ 6083515 no no Wed, 14 Jul 2021 12:16:02 +0200 2021-07-14T12:16:02+02:00 02:58 https://hearthis.at/thebadgerman/gone-is-the-moment/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 6047932 no no Sat, 03 Jul 2021 14:14:04 +0200 2021-07-03T14:14:04+02:00 02:36 https://hearthis.at/thebadgerman/dreadnought/ 5962940 no no Wed, 02 Jun 2021 14:22:19 +0200 2021-06-02T14:22:19+02:00 02:32 https://hearthis.at/thebadgerman/a-hat-for-all-occasions/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5946133 no no Thu, 27 May 2021 13:57:25 +0200 2021-05-27T13:57:25+02:00 03:02 https://hearthis.at/thebadgerman/solar-eclipse/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5844212 no no Tue, 20 Apr 2021 16:15:00 +0200 2021-04-20T16:15:00+02:00 03:54 https://hearthis.at/thebadgerman/hold-the-fort/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5821591 no no Sun, 11 Apr 2021 14:28:11 +0200 2021-04-11T14:28:11+02:00 02:49 https://hearthis.at/thebadgerman/myriad/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5718178 no no Sat, 13 Mar 2021 12:58:50 +0100 2021-03-13T12:58:50+01:00 02:50 https://hearthis.at/thebadgerman/3-wishes/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5684119 no no Mon, 01 Mar 2021 13:58:42 +0100 2021-03-01T13:58:42+01:00 02:49 https://hearthis.at/thebadgerman/the-man-in-the-hat/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5281913 no no Fri, 06 Nov 2020 13:10:23 +0100 2020-11-06T13:10:23+01:00 03:14 https://hearthis.at/thebadgerman/summit-meeting/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5246447 no no Sun, 25 Oct 2020 14:29:40 +0100 2020-10-25T14:29:40+01:00 03:13 https://hearthis.at/thebadgerman/just-out-of-the-box/ 5229463 no no Mon, 19 Oct 2020 12:18:52 +0200 2020-10-19T12:18:52+02:00 03:14 https://hearthis.at/thebadgerman/all-among-the-beer-crates/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 5153880 no no Thu, 24 Sep 2020 12:41:15 +0200 2020-09-24T12:41:15+02:00 02:35 https://hearthis.at/thebadgerman/playing-catchup/ 5140237 no no Sat, 19 Sep 2020 15:45:56 +0200 2020-09-19T15:45:56+02:00 03:14 https://hearthis.at/thebadgerman/by-numbers/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 4813463 no no Wed, 10 Jun 2020 13:16:59 +0200 2020-06-10T13:16:59+02:00 03:02 https://hearthis.at/thebadgerman/the-native-cry/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 4842809 no no Wed, 10 Jun 2020 13:14:57 +0200 2020-06-10T13:14:57+02:00 03:24 https://hearthis.at/thebadgerman/airflow/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 4203296 no no Tue, 24 Dec 2019 15:16:43 +0100 2019-12-24T15:16:43+01:00 02:46 https://hearthis.at/thebadgerman/the-warrior/
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]>
I am a recording artist and all the material I put on
the web is what I have created and recorded on my own.
I have no band and the tunes are created using basic
overdubs, multitracking and sequencing.
I use Cubase Pro 11
The gear I use : BMG special( brian may red special), Sterling albert lee musicman, Gibson SG special, Epiphone 59 les paul, fender stratocaster (usa), fender stratocaster (mim), fender telecaster (mim), PRS SE standard 24, Yamaha APX500II elec/acoustic, squier jazz bass, Yamaha MOX6 workstation, 3 E-drumkits to play/program the backing tracks ready for the guitar, bass and keyboard overdubs.
Effects: Boss GP10, Boss GT-1000 multi processor, Roland GR55 guitar synth. Pedalboard: Boss DS-1, Strymon irridium amp pedal, Boss DD6, Boss RV6.
I compose all my backing parts from scratch.
When I`m happy with the mix it can be mastered to the formats WAVE & MP3.

When i was 18 I cut my arm. it was pretty bad and I damaged a tendon
which affected my left hand ring finger, Cant completely flatten it.
Then a few years later I fell and broke the knuckle on the same hand.
I never had it set so its a bit bent.
I still stuck to playing my guitar. Had to play barre chords differently and the speed in my fingers was an issue but I carried
on and still play quite efficiently now. (would have preferred to have full functionality). But some of the greats have had these sort of problems . django, tony iommi and mel galley. If you love playing then you`ll find a way.

Phil Spencer]]> 4202968 no no Tue, 24 Dec 2019 11:48:13 +0100 2019-12-24T11:48:13+01:00 02:58